7202 BEP (Angular Contact Ball bearing)
The 7202 BEP is a Angular Contact Ball bearing with boundary dimensions of 15 x 35 x 11 mm (bore x outside diameter x width). It has a basic dynamic load rating of 9.8 kN and a basic static load rating of 5.6 kN.
Cross-Reference
| Manufacturer | Reference |
|---|---|
| SKF | 7202 BEP |
| Timken | 7202 |
| FAG (Schaeffler) | 7202-B |
Cross-references are matched on the ISO 15 boundary dimensions
(15 x 35 x 11 mm) and bearing type, which is what makes parts interchangeable. The
suffixes (e.g. -2RS, -2Z, -E1) encode seals, shields, and internal design
variants, not the envelope size.
Boundary Dimensions
| Dimension | Value |
|---|---|
| Bore (d) | 15 mm |
| Outside diameter (D) | 35 mm |
| Width (B/T) | 11 mm |
Load Ratings
| Rating | Value |
|---|---|
| Basic dynamic load rating (C) | 9.8 kN |
| Basic static load rating (C0) | 5.6 kN |
Type & Application Notes
Angular Contact Ball bearings are designed for combined radial and axial loads with a contact angle. The 7202 BEP is commonly found in pumps, compressors, and machine-tool spindles where combined loads occur. Dynamic rating 9.8 kN sets the load a bearing can carry for a one-million-revolution rating life (L10), while the static rating 5.6 kN governs the maximum load a stationary bearing can withstand without permanent deformation.
Interchange Notes
When substituting the 7202 BEP:
- Match the boundary dimensions (15 x 35 x 11 mm) exactly — this is what guarantees fit.
- Match the bearing type (Angular Contact Ball); mixing roller and ball types changes stiffness, speed limits, and load capacity.
- Match or exceed the dynamic load rating (9.8 kN) for the intended life.
- Respect the seal/shield suffix the application requires (open, Z, 2Z, RS, or 2RS).
Frequently Asked Questions
What Timken bearing crosses to SKF 7202 BEP?
The Timken equivalent is 7202.
What FAG bearing crosses to SKF 7202 BEP?
The FAG (Schaeffler) equivalent is 7202-B.
What are the dimensions of the 7202 BEP bearing?
15 x 35 x 11 mm (bore x OD x width).
What is the load rating of the 7202 BEP bearing?
Dynamic 9.8 kN, static 5.6 kN.
What type of bearing is the 7202 BEP?
It is a Angular Contact Ball bearing.